Skip to content

7. Place foil on the vinyl cutter

Place the foil on the vinyl cutter, with the white side up, i.e. with the thick and transparent plastic at the bottom.

Only use two of the three rollers. If you use three rollers, you will get distorted images.

View Before cutting After cutting
Slice Slice before Slice after
Isometric Isometric before Isometric after

Structure of the foil and what will be cut away. Light-blue: thick, transparent layer, do not cut, can be separated from orange layer by hand. Orange: the color of the print. White: the glue connecting the print to the T-shirt

The knife cuts the white and colored layer only. The thick and transparent layer needs to remain intact.