6. Setup the vinyl cutter

The vinyl cutter has three parameters:

• Origin: the bottom-left of the cut, move the red dot to the bottom-left of the vinyl
• Speed: the speed of the blade
  • If the speed is too high, no idea what happens. Please contribute if you know!
  • If the speed is too low, the process takes needlessly longer
• Force: how much force the blade applies to the vinyl
  • If the force is too high, the cutter will go through the vinyl
  • If the force is too low, the vinyl cannot be removed easily

Vinyl	Speed (mm/s)	Force(g)	Recommendation source
Siser P.S. Film	20	120	Trying out, works!
Siser P.S. Film	300	60	manual